Materials
Polymaker PolyLite ASA
UV- and weather-resistant; enclosure recommended.
Verified November 2026 · Polymaker data sheetPrint settings
- Nozzle temperature
- 240–260°C
- Bed temperature
- 75–95°C
- Density
- 1.1 g/cm³
- Length per kg (1.75 mm)
- ≈ 378 m
- Enclosure
- Recommended
- Drying
- 75°C for 6 h
- Typical price
- $27 per kg
About ASA
Like ABS with much better UV and weather resistance. Ideal for outdoor parts.
Getting good results with Polymaker PolyLite ASA
- Start near the middle of the range (250°C) and print a temperature tower to find your printer's sweet spot.
- Faster printing needs a hotter nozzle; slow, detailed prints look best near the low end of the range.
- Use an enclosure and keep drafts away to prevent warping and layer splits.
- Dry it (75°C for 6 h) if you hear popping, see extra stringing, or the surface turns rough.
Plan a print with the print cost calculator or convert meters to grams with the filament converter. Always check the label on your spool, since makers update their recommendations.